$ 12.00
SKU: 43006BIO

Use SPAGUARD SOFT SOAK SANITIZER To Adequately Sanitize Hot Tub Water Without Chlorine Or Bromine And Break Down Unwanted Compounds. 

***Note: If New To Owning A Hot Tub Or Considering The Soft Soak System Please Note This System Requires More Attention To pH/Alkalinity/Calcium Levels.
 

Label Directions For Use: Read entire product label and use strictly in accordance with hazard statements and directions. Consult your BioGuard SoftSoak Dealer for proper water balance before starting on the SoftSoak System.

Label Directions For Start Up: Add this product third. The SoftSoak Sanitizer is added fourth.

  1. Add 3 fluid ounces of SoftSoak Shock-Oxidizer per 150 gallons of spa water directly to the spa. Wipe off any excess product that may have dripped down the side of the bottle with a clean, damp cloth. Rinse cloth with water after wiping bottle.
  2. Circulate water continuously for approximately 30 minutes.

Label Directions For Weekly Maintenance: Add this product third. The SoftSoak Sanitizer is added fourth.

  1. Add Shock-Oxidizer according to spa usage at a rate of 1.5-3 ounces per 150 gallons of spa water weekly according to spa use rate. If your spa is used three or more times per week, add 3 ounces of SoftSoak Shock-Oxidizer per 150 gallons of spa water weekly. Wipe off any excess product that may have dripped down the side of the bottle with a clean, damp cloth. Rinse cloth with water after wiping bottle. 
  2. Ciculate water continuously for approximately 30 minutes. Test spa water once a week. Maintain the pH between 7.4-7.6, total alkalinity at 80-120 ppm and calcium hardness 200-300 ppm.