Use BIOGUARD POWERFLOC To Clear Cloudy Water Fast.
***Note: Powerfloc Is A Settling Agent And Requires A Decent Amount Of Elbow Grease, But It Is Very Effective In Most Cases. We Are Very Selective When Recommending This As A Solution For Cloudy Pools As There Are Certain Conditions That Must Be Considered. Please Call And Speak To One Of Our H2Know Team Members Before Considering This Product.
Label Directions For Use: SHAKE WELL BEFORE USE. Check filter and backwash or clean filter if necessary. Adjust pH to 7.5-8.0 for best results. Use at a rate of 8 fl oz per 10,000 gallons. Remove skimmer basket and any product in the skimmer. Pour PowerFloc slowly into skimmer with the pump on and filter valve in Recirculate or Whirlpool position. For filters without Recirculate position: backwash, then with filter in FILTER position, dilute PowerFloc into large plastic pail of water (8 fl oz per 1 gallon of water, always add PowerFloc to water, never water to PowerFloc) and apply evenly over surface of pool. Replace skimmer basket after applying PowerFloc. Allow pump to circulate water for 2 hours to distribute PowerFloc throughout the pool. Shut off the pump. Let PowerFloc settle debris to bottom while pool remains undisturbed for 12 to 24 hours. For extremely cloudy pools use double the normal dosage. VACUUM TO WASTE all settled debris with filter in WASTE or DRAIN mode. Backwash and clean filter with BioGuard Kleen-It and resume normal filter cycle.